TP316H Stainless Steel Pipe
Grade: 316H/TP316H/UNS S31609/W.Nr.1.4918/SUS316HTP
Size:
Seamless: 6mm*1mm-720mm*50mm
Welded: 12mm*0.5mm-2000mm*100mm
Coiled: 4mm*0.3mm-32mm*3mm
Standard: ASTM A312, ASTM A213, ASME SA312, ASME SA213 etc.
Surface: No.1(Pickling), Bright(Polished)
- Fast Shipping / Ready Stock
- ISO 9001 Factory
- Custom Cutting
- 100% MTC & SGS Inspection
TP316H is the high-carbon variant of molybdenum-bearing Type 316 austenitic stainless steel, formulated for enhanced elevated-temperature mechanical performance. The addition of 2.0%–3.0% molybdenum improves resistance to pitting, crevice corrosion, and sulfuric/organic acids, while the 0.04%–0.10% carbon range boosts short-term tensile strength and long-term creep rupture properties. It is widely specified where combined high-temperature strength and superior corrosion resistance are essential.
Chemical Composition (wt%, ASTM A213 / A312)
| C | Mn | P | S | Si | Cr | Ni | Mo | Other |
| 0.04 – 0.10 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 1.00 | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | — |
Mechanical & Thermal Properties (Solution Annealed Condition)
| Property / Parameter | Specification Requirement |
| Tensile Strength (min) | ≥ 515 MPa (75 ksi) |
| Yield Strength, 0.2% Offset (min) | ≥ 205 MPa (30 ksi) |
| Elongation in 2 in. / 50 mm (min) | ≥ 35% |
| Hardness (max) | ≤ 90 HRB / 192 HBW |
| Max Continuous Service Temp. | ~815°C (1500°F) |
Typical Applications
- High-pressure superheater and reheater tubing in aggressive flue-gas environments
- Chemical and pharmaceutical reactor coils, condensers, and heat exchangers
- Pulp and paper digester heaters and marine/offshore thermal piping
- Refinery hydrocracking and desulfurization high-temperature transfer lines


TP316H is the high-carbon variant of molybdenum-bearing Type 316 austenitic stainless steel, formulated for enhanced elevated-temperature mechanical performance. The addition of 2.0%–3.0% molybdenum improves resistance to pitting, crevice corrosion, and sulfuric/organic acids, while the 0.04%–0.10% carbon range boosts short-term tensile strength and long-term creep rupture properties. It is widely specified where combined high-temperature strength and superior corrosion resistance are essential.
Chemical Composition (wt%, ASTM A213 / A312)
| C | Mn | P | S | Si | Cr | Ni | Mo | Other |
| 0.04 – 0.10 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 1.00 | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | — |
Mechanical & Thermal Properties (Solution Annealed Condition)
| Property / Parameter | Specification Requirement |
| Tensile Strength (min) | ≥ 515 MPa (75 ksi) |
| Yield Strength, 0.2% Offset (min) | ≥ 205 MPa (30 ksi) |
| Elongation in 2 in. / 50 mm (min) | ≥ 35% |
| Hardness (max) | ≤ 90 HRB / 192 HBW |
| Max Continuous Service Temp. | ~815°C (1500°F) |
Typical Applications
- High-pressure superheater and reheater tubing in aggressive flue-gas environments
- Chemical and pharmaceutical reactor coils, condensers, and heat exchangers
- Pulp and paper digester heaters and marine/offshore thermal piping
- Refinery hydrocracking and desulfurization high-temperature transfer lines
Related products
-
904L Stainless Steel
904L/N08904 Stainless Steel Plate
-
300 Series Stainless Steel
309S/309H Stainless Steel Plate
-
300 Series Stainless Steel
304N Stainless Steel Plate
-
300 Series Stainless Steel
304H Stainless Steel Plate
-
300 Series Stainless Steel
321/321H Stainless Steel Plate
-
Stainless Steel
Stainless Steel Perforated Sheet








































