Chemical composition Element Limit wt % Element Limit wt % Si 0.25 max Fe 0.40 max Cu 0.10 max Mn 0.10 max Mg 2.20–2.80 Cr 0.15–0.35 Zn 0.10 max Ti — Other each 0.05 max Other total 0.15 max Al Balance

Mechanical properties by temper Temper Thickness mm Rm MPa Rp0.2 MPa Elongation % O 1.5–3.0 170–215 65 min 16 min H22 / H32 1.5–3.0 210–260 130 min 7 min H24 / H34 1.5–3.0 230–280 150 min 6 min H28 / H38 1.5–3.0 270 min 210 min 4 min

Application areas Marine components and boat sheet structures Fuel and oil tanks and compatible fluid containers Transportation panels and equipment housings Fabricated components exposed to vibration General welded sheet metal assemblies

Chemical composition Element Limit wt % Element Limit wt % Si 0.25 max Fe 0.40 max Cu 0.10 max Mn 0.10 max Mg 2.20–2.80 Cr 0.15–0.35 Zn 0.10 max Ti — Other each 0.05 max Other total 0.15 max Al Balance

Mechanical properties by temper Temper Thickness mm Rm MPa Rp0.2 MPa Elongation % O 1.5–3.0 170–215 65 min 16 min H22 / H32 1.5–3.0 210–260 130 min 7 min H24 / H34 1.5–3.0 230–280 150 min 6 min H28 / H38 1.5–3.0 270 min 210 min 4 min

Application areas Marine components and boat sheet structures Fuel and oil tanks and compatible fluid containers Transportation panels and equipment housings Fabricated components exposed to vibration General welded sheet metal assemblies

5052 Aluminum Sheet and Plate

Grade: 5052

Coil: 0.3mm-3.0mm

Sheet: 0.3mm-300mm

Width: 50mm-2000mm

Standard: ASTM, AMS, BS etc.

5052 is a non heat treatable aluminum magnesium chromium alloy with a useful combination of strength, fatigue performance and formability. It resists marine atmospheres well and is readily welded. Annealed material is suitable for demanding forming, while stabilized H32 and H34 sheet are widely used for fabricated components. Cold work increases strength but reduces ductility, and welding can soften hardened material locally. Typical applications include marine sheet structures, tanks, equipment housings and transportation components.

Chemical composition

Element	Limit wt %	Element	Limit wt %
Si	0.25 max	Fe	0.40 max
Cu	0.10 max	Mn	0.10 max
Mg	2.20–2.80	Cr	0.15–0.35
Zn	0.10 max	Ti	—
Other each	0.05 max	Other total	0.15 max
Al	Balance

Mechanical properties by temper

Temper	Thickness mm	Rm MPa	Rp0.2 MPa	Elongation %
O	1.5–3.0	170–215	65 min	16 min
H22 / H32	1.5–3.0	210–260	130 min	7 min
H24 / H34	1.5–3.0	230–280	150 min	6 min
H28 / H38	1.5–3.0	270 min	210 min	4 min

Application areas

Marine components and boat sheet structures
Fuel and oil tanks and compatible fluid containers
Transportation panels and equipment housings
Fabricated components exposed to vibration
General welded sheet metal assemblies

Introduction

Specification

Chemical composition

Element	Limit wt %	Element	Limit wt %
Si	0.25 max	Fe	0.40 max
Cu	0.10 max	Mn	0.10 max
Mg	2.20–2.80	Cr	0.15–0.35
Zn	0.10 max	Ti	—
Other each	0.05 max	Other total	0.15 max
Al	Balance

Mechanical

Mechanical properties by temper

Temper	Thickness mm	Rm MPa	Rp0.2 MPa	Elongation %
O	1.5–3.0	170–215	65 min	16 min
H22 / H32	1.5–3.0	210–260	130 min	7 min
H24 / H34	1.5–3.0	230–280	150 min	6 min
H28 / H38	1.5–3.0	270 min	210 min	4 min