6 Most Popular Nickel Alloy Grades Compared: Performance, Applications and How to Choose

conel 625, Inconel 718, Hastelloy C276, Monel 400, Incoloy 825 and Nickel 200 are the six most widely specified nickel alloy grades in industry. They all sound similar to the untrained eye, and procurement teams often confuse them or default to the grade they have used before—even when a different one would perform better or cost less.

This side-by-side comparison breaks down the core strengths, limits and ideal use cases of each grade, so you can make an informed choice for your next project.

1. Inconel 625 (UNS N06625)

  • Core chemistry: Ni-Cr-Mo-Nb
  • Primary strength: Excellent combination of high-temperature strength, oxidation resistance and aqueous corrosion resistance
  • Temperature range: Up to ~980°C continuous service
  • Best for: Aerospace ducting, chemical process equipment, seawater components, flare stacks, fasteners and structural parts where both heat and corrosion are concerns
  • Key advantage: Extremely versatile “workhorse” grade used across almost every industry

2. Inconel 718 (UNS N07718)

  • Core chemistry: Ni-Cr-Fe-Mo-Nb-Al-Ti (precipitation hardening)
  • Primary strength: Exceptional high-temperature tensile and creep strength; age-hardenable to very high strength levels
  • Temperature range: Up to ~700°C for high-strength service
  • Best for: Aerospace turbine disks, blades, shafts, fasteners, high-pressure valves and cryogenic storage tanks
  • Key advantage: Highest strength-to-temperature ratio among commonly available nickel alloys

3. Hastelloy C276 (UNS N10276)

  • Core chemistry: Ni-Mo-Cr-W
  • Primary strength: Industry-leading broad-spectrum corrosion resistance to both oxidizing and reducing acids, chloride pitting and stress corrosion cracking
  • Temperature range: Excellent corrosion resistance up to ~650°C; can be used at higher temperatures for oxidation service
  • Best for: Chemical reactors, FGD scrubbers, pulp and paper digesters, sour oilfield equipment, pharmaceutical processing
  • Key advantage: The most widely accepted “universal” severe corrosion alloy

4. Monel 400 (UNS N04400)

  • Core chemistry: Ni-Cu (~67% Ni, ~31% Cu)
  • Primary strength: Unmatched resistance to seawater, brines and neutral/alkaline salt solutions; high toughness and ductility
  • Temperature range: Good mechanical properties from cryogenic up to ~480°C
  • Best for: Marine piping, pump shafts, valves, heat exchangers, desalination equipment, chemical processing of brines
  • Key advantage: Proven 50+ year service life in seawater applications

5. Incoloy 825 (UNS N08825)

  • Core chemistry: Ni-Fe-Cr-Mo-Cu (higher iron content than Inconel)
  • Primary strength: Good general corrosion resistance, especially to sulfuric acid and chloride solutions, at a more economical price point
  • Temperature range: Up to ~550°C for oxidation service
  • Best for: Heat exchangers, process piping, water treatment, pickling equipment, oil and gas gathering lines
  • Key advantage: Excellent balance of performance and cost for moderate corrosion conditions

6. Nickel 200 (UNS N02200)

  • Core chemistry: 99.6%+ pure nickel
  • Primary strength: Unrivaled resistance to strong caustic alkalis (NaOH, KOH); excellent electrical and thermal conductivity; high purity
  • Temperature range: Useful up to ~315°C; above this it may suffer graphitization
  • Best for: Caustic soda production, food processing equipment, battery components, electrical connectors, vacuum equipment
  • Key advantage: The only practical choice for concentrated hot caustic service

Side-by-side comparison table

GradePrimary AdvantageMax Continuous TempTypical Price LevelCore Industry
Inconel 625Heat + corrosion versatility~980°CMedium-HighAerospace, Chemical, Marine
Inconel 718Highest high-temp strength~700°CHighAerospace, Energy
Hastelloy C276Broadest corrosion resistance~650°CHighestChemical, FGD, Oil & Gas
Monel 400Seawater corrosion king~480°CMediumMarine, Desalination
Incoloy 825Best performance/cost ratio~550°CMedium-LowGeneral process, Oil & Gas
Nickel 200Caustic alkali + high purity~315°CMediumChlor-alkali, Food, Electronics

Quick decision guide

  • If you need maximum high-temperature strength → Inconel 718
  • If you need maximum chemical corrosion resistance → Hastelloy C276
  • If you need seawater and brine resistance → Monel 400
  • If you need versatile heat + corrosion at good value → Inconel 625
  • If you need decent corrosion at the lowest nickel alloy cost → Incoloy 825
  • If you need caustic alkali resistance or high purity → Nickel 200

All six grades are stocked at Detect Metals in sheet, plate, bar, pipe, tube and coil forms, with custom cutting and full mill certification. To browse specifications for these grades and the rest of our nickel alloy portfolio, visit our Nickel Alloy products or contact us for a project-specific quote.

Translate »
Scroll to Top

Request a Quote

Name
Interested Products

Get Free Sample

Name
Interested Products