- Medical & Biomedical Grade Metals
Biocompatible & Surgical Grade Metal Materials for Medical Devices
Biocompatible, non-toxic precision alloys for surgical instruments, implantable parts and medical device components. Medical grade Titanium, 316LVM, Cobalt Chrome and Nitinol alloys in stock.
- ISO 13485 / ASTM F138 / ISO 5832 Compliant
- 100% Biocompatibility & Cleanroom Traceability
- Ultrasonic Cleaned & Capillary Tubing Available
Get a Fast Quote for Your Project
Receive detailed specs, lead times, and factory pricing within 12 hours.
- 100% Confidential
- 12-Hour SLA
- Free Technical Support
ASTM F138 & F136 Implant Grade
Strict Surgical Implant Compliance
ISO 13485 Quality System
Medical Device Quality Guarantee
EN 10204 3.1 Mill Reports
100% Heat Traceable Certificates
Passivation & Cleanroom Ready
Cytotoxicity & Ultrasonic Verified
Medical & Biomedical Key Material Matrix
Explore our specialized portfolio of implant-grade titanium, vacuum-melted stainless steel, high-hardness surgical instrument alloys, and precision hypodermic capillary tubing.
| Category | Typical Material Grades | Key Features & Biocompatibility | Available Product Forms |
|---|---|---|---|
| Biocompatible Titanium Alloys | Ti-6Al-4V ELI (Grade 23 / ASTM F136) Pure Titanium Grade 2 (ASTM F67) Grade 5 (Ti-6Al-4V / ASTM B348) | Extra low interstitial (ELI) purity, superior biomechanical strength, non-magnetic, and osseointegration properties. | Precision Ground Round Bars, Fine Wire Stock, Plates, Forged Disks |
| Implant Stainless Steel | 316LVM (ASTM F138 / ISO 5832-1) 316L Medical Grade 317L Bio-Resistant | Vacuum Arc Remelted (VAR) for ultra-high micro-cleanliness, zero inclusion risk, and resistance to body fluid corrosion. | Precision Cut Sheets, Centerless Ground Rods, Custom Strips |
| Surgical Instrument Steel | 420 / 420 MOD (ASTM F899) 440C High-Hardness 17-4PH Medical Grade 410 Stainless | High martensitic hardness after heat treatment (up to 58 HRC), sharp edge retention, and resistance to repeated autoclave cycles. | Forged Instrument Blanks, Precision Round Bars, Flat Stock |
| Precision Medical Tubing | 316L / 316LVM Tubing Ti-6Al-4V ELI Seamless Tube Grade 2 Capillary Tubing | Ultra-smooth inner/outer diameter surface finishes, micro-tolerances for fluid delivery, and burr-free needle cutting. | Micro-Capillary Tubes, Hypodermic Tubing, Cannula Stock |
Targeted Sub-Industry Applications
Surgical Instruments & Tools
Scalpel handles, forceps, bone drills, retractors, scissors, and laparoscopic cutters.
Orthopedic & Dental Implants
Trauma bone screws, spinal fixation plates, artificial hip joints, and dental implant posts.
Diagnostic & Endoscopic Devices
Endoscope housings, guiding catheter wires, biopsy needles, and micro fluidic connectors.
Biopharm & Processing Systems
Sanitary fluid delivery valves, cleanroom fermentation vessels, and sterile filtration tubing.
Advanced Medical Processing
-
Electropolishing & Passivation
Citric/Nitric passivation complying with ASTM A967 to enhance passive chromium oxide layer and prevent iron contamination.
-
Cleanroom Ultrasonic Washing
Multi-stage ultrasonic degreasing and deionized water rinsing to ensure zero oil or particulate residual on medical stock.
-
Centerless Grinding & Micro-Sizing
Ultra-tight bar diameter tolerances (h7/h6) suitable for high-speed Swiss CNC machining of miniature implant screws.
Why Medical Device OEMs Trust Detect Metals
We eliminate bio-compatibility risks with zero-defect quality control, certified vacuum melts, and full regulatory documentation.
Strict Biocompatibility
Fully compliant with ASTM F-series and ISO 5832 standards for human tissue contact and long-term implantability.
Zero Contamination Guarantee
Cleanroom processing, oil degreasing, and protective protective sleeve packaging prevent shop-floor contaminants.
Full Heat Number Traceability
100% raw material melt heat identification maintained across cutting, grinding, and shipping with EN 10204 3.1 MTC.
Micro-Precision Tolerances
Specialized in small-diameter ground rods and thin-walled capillary tubes engineered for high-precision surgical components.
Frequently Asked Questions
Technical & regulatory guidance for biomedical engineers and medical device procurement specialists.
Ready to Power Your Next Medical Project?
Send us your specifications today and receive a competitive factory quote along with sample MTC documentation within 12 hours.