Biocompatible & Surgical Grade Metal Materials for Medical Devices

Biocompatible, non-toxic precision alloys for surgical instruments, implantable parts and medical device components. Medical grade Titanium, 316LVM, Cobalt Chrome and Nitinol alloys in stock.

Get a Fast Quote for Your Project

Receive detailed specs, lead times, and factory pricing within 12 hours.

Medical & Biomedical Grade Metal Materials | Detect Metals

ASTM F138 & F136 Implant Grade

Strict Surgical Implant Compliance

ISO 13485 Quality System

Medical Device Quality Guarantee

EN 10204 3.1 Mill Reports

100% Heat Traceable Certificates

Passivation & Cleanroom Ready

Cytotoxicity & Ultrasonic Verified

Medical & Biomedical Key Material Matrix

Explore our specialized portfolio of implant-grade titanium, vacuum-melted stainless steel, high-hardness surgical instrument alloys, and precision hypodermic capillary tubing.

Category Typical Material Grades Key Features & Biocompatibility Available Product Forms
Biocompatible Titanium Alloys Ti-6Al-4V ELI (Grade 23 / ASTM F136) Pure Titanium Grade 2 (ASTM F67) Grade 5 (Ti-6Al-4V / ASTM B348) Extra low interstitial (ELI) purity, superior biomechanical strength, non-magnetic, and osseointegration properties. Precision Ground Round Bars, Fine Wire Stock, Plates, Forged Disks
Implant Stainless Steel 316LVM (ASTM F138 / ISO 5832-1) 316L Medical Grade 317L Bio-Resistant Vacuum Arc Remelted (VAR) for ultra-high micro-cleanliness, zero inclusion risk, and resistance to body fluid corrosion. Precision Cut Sheets, Centerless Ground Rods, Custom Strips
Surgical Instrument Steel 420 / 420 MOD (ASTM F899) 440C High-Hardness 17-4PH Medical Grade 410 Stainless High martensitic hardness after heat treatment (up to 58 HRC), sharp edge retention, and resistance to repeated autoclave cycles. Forged Instrument Blanks, Precision Round Bars, Flat Stock
Precision Medical Tubing 316L / 316LVM Tubing Ti-6Al-4V ELI Seamless Tube Grade 2 Capillary Tubing Ultra-smooth inner/outer diameter surface finishes, micro-tolerances for fluid delivery, and burr-free needle cutting. Micro-Capillary Tubes, Hypodermic Tubing, Cannula Stock

Targeted Sub-Industry Applications

Surgical Instruments & Tools

Scalpel handles, forceps, bone drills, retractors, scissors, and laparoscopic cutters.

Orthopedic & Dental Implants

Trauma bone screws, spinal fixation plates, artificial hip joints, and dental implant posts.

Diagnostic & Endoscopic Devices

Endoscope housings, guiding catheter wires, biopsy needles, and micro fluidic connectors.

Biopharm & Processing Systems

Sanitary fluid delivery valves, cleanroom fermentation vessels, and sterile filtration tubing.

Advanced Medical Processing

  • Electropolishing & Passivation

    Citric/Nitric passivation complying with ASTM A967 to enhance passive chromium oxide layer and prevent iron contamination.

  • Cleanroom Ultrasonic Washing

    Multi-stage ultrasonic degreasing and deionized water rinsing to ensure zero oil or particulate residual on medical stock.

  • Centerless Grinding & Micro-Sizing

    Ultra-tight bar diameter tolerances (h7/h6) suitable for high-speed Swiss CNC machining of miniature implant screws.

Why Medical Device OEMs Trust Detect Metals

We eliminate bio-compatibility risks with zero-defect quality control, certified vacuum melts, and full regulatory documentation.

Strict Biocompatibility

Fully compliant with ASTM F-series and ISO 5832 standards for human tissue contact and long-term implantability.

Zero Contamination Guarantee

Cleanroom processing, oil degreasing, and protective protective sleeve packaging prevent shop-floor contaminants.

Full Heat Number Traceability

100% raw material melt heat identification maintained across cutting, grinding, and shipping with EN 10204 3.1 MTC.

Micro-Precision Tolerances

Specialized in small-diameter ground rods and thin-walled capillary tubes engineered for high-precision surgical components.

Frequently Asked Questions

Technical & regulatory guidance for biomedical engineers and medical device procurement specialists.

Medical-grade 316LVM (ASTM F138) undergoes Vacuum Arc Remelting (VAR). This extra refinement step drastically reduces non-metallic inclusions and impurities compared to standard 316L. The result is superior corrosion resistance in physiological body fluids, enhanced fatigue strength, and optimal suitability for temporary surgical implants and instruments.
Yes. Our Ti-6Al-4V ELI (Grade 23) material strictly conforms to ASTM F136 and ISO 5832-3 standards. The ELI (Extra Low Interstitial) designation guarantees reduced levels of iron, oxygen, and nitrogen, delivering higher fracture toughness and fatigue resistance required for permanent bone screws, plates, and joint prostheses.
Absolutely. We offer ultrasonic degreasing, deionized water rinsing, and citric acid or nitric acid passivation in accordance with ASTM A967. Tubing and fine rods can be delivered end-capped and sealed in protective polyethylene tubing to maintain cleanroom readiness.
Every order is shipped with a comprehensive Mill Test Certificate (EN 10204 3.1) stating chemical composition analysis, tensile and yield strengths, elongation percentages, grain size evaluation, and ultrasonic/eddy-current testing results verifying compliance with applicable ASTM F-series or ISO 5832 standards.

Ready to Power Your Next Medical Project?

Send us your specifications today and receive a competitive factory quote along with sample MTC documentation within 12 hours.

Translate »
Scroll to Top

Request a Quote

Name
Interested Products

Get Free Sample

Name
Interested Products