Monel K-500 Alloy Sheet

Detect Metals' Workshop

Monel K-500 Alloy Sheet

ASTM/AMS N05500 Alloy Sheet

EN 2.4375 Nickel based Alloy Sheet

Standard:

Bars, Wires and Forgings: ASTM B865, SAE AMS 4676, ISO 9725

Pipes: BS 3074NA18, DIN 17751

Sheets, Strip: BS3072NA18, BS3073NA18, ISO 6208, DIN 17750

Others: DIN 17743, SAE AMS 4676

Characteristics

Monel K500 is a Ni-Cu alloy with age-hardening properties imparted by alloying additions of aluminium and titanium. Its basic composition is similar to that of Monel 400 but the alloying additions make it age hardenable under controlled conditions of temperature and time.

Characteristics of Monel K500

excellent corrosion resistance in an extensive range of natural and chemical environments
excellent resistance to chloride-ion stress-corrosion cracking
very high strength and hardness After age-hardening

After age-hardening of characeristics of Monel K500

approximately 2 to 3 times higher mechanical properties than the Monel 400
high tensile properties up to about 650℃
good fatigue and corrosion fatigue resistance
low permeability; non-magnetic down to -135℃

Density: 8.47

Corrosion resistance

In general, the corrosion resistance of Monel K500 Alloy is similar to that of Monel 400 Alloy. Excellent resistance is shown to a wide range of media from pure water to mineral acids, salts and alkalis. Monel K500 Alloy is virtually immune to chloride-ion stress-corrosion cracking. In the aged condition, the alloy may be susceptible to stress-corrosion cracking in moist, aerated hydrofluoric acid vapour at stresses near the yield strength. In high-velocity seawater and in marine atmospheres, good corrosion resistance is shown but, in slow-moving or stagnant seawater, pitting may occur. Monel K500 Alloy also shows good resistance in sour-gas environments.

Applications

Monel K500 Alloy finds wide application in the marine, chemical, petrochemical and shipbuilding industries.

Typical applications are:

valve seals, pump sleeves and wear rings in marine environments - high strength and resistance to seawater
pump shafts for fire-fighting pumps - high strength (resulting in smaller diameter shafts) and resistance to flowing seawater
fasteners, e.g. bolts, used in marine atmospheres and tidal waters - resistance to chloride-containing environments
doctor blades and scrapers
towing cable armouring - high strength, non-magnetic properties and resistance to seawater
springs - resistance to a variety of corrosive media
oil well drilling equipment such as non-magnetic drill collars, valves and instrumentation sleeves - resistance to chloride-containing media and sour-gas environments
aviation instrument components - non-magnetic properties

Chemical composition

	Ni	Fe	C	Mn	Si	Cu	Al	Ti	S	P	Zn	Pb	Sn
min(%)	63.0					27.0	2.30	0.35
max(%)		2.0	0.18	1.5	0.50	33.0	3.15	0.85	0.010

Mechanical properties

	Condition	Yield Strength(Mpa)	Tensile Strength(Mpa)	Elongation(%)	Hardness(HB)
ASTM Min Value	Soft Annealed Aged	690	965	20	265
Typical Values at RT	Hot worked Aged	902	1078	25	305
Typical Values at RT	Cold worked Aged	902	1078	22	310
Typical Values at RT	Soft Annealed Aged	686	1000	28	285

International Specification Comparison chart

	Material	Round Bar	Plate
ASTM	UNS N05500	B164
ASME	UNS N05500
JIS	NW5500	H4553	H4551
DIN	2.4375	17752

Product: Sheet, Coil, Pipe, Bar, Wire and Forgings

Product Name	Monel K-500 Alloy Sheet
Brand	Tianjin Detai Co.,Ltd
Payment Acceptable	T/T,L/C
Port	Tianjin, Shanghai, Ningbo
Package	Wooden package , less than 2 tons per cases
Delivery time	within 15 working days

Monel K-500 Alloy Sheet

Detect Metals' Workshop

Related Products