Aluminum divided into five categories

DSC06723
1.Brushed aluminum plate:  the process is divided into the main flow of degreasing, Sanders, washed three parts. In aluminum wire drawing process, need to repeatedly use sandpaper to scraped line in aluminum surface, a special anodized coating technology after the aluminum surface can form a coating layer of the metal component containing each of fine silk show clear marks, so that the metal in matte glow fine hair silk sheen.

2.Oxidation Alumina plate: aluminum plate placed in the appropriate electrolyte solution (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, under certain conditions, and applied current role, were formed aluminum electrolysis. Anodic aluminum oxide, aluminum oxide thin layer formed on the surface to a thickness of 5 to 20 microns, hard anodic oxide films of up to 60 to 200 microns.

3.PS aluminum plate (also known as a printed advertisement aluminum zinc plate, newspaper board): the back of the printed pattern the aluminum plate.

4.Mirror aluminum plate: refers to treatment by a variety of methods rolling, grinding, so that the aluminum surface looke like the mirror .

5.Embossed aluminum plate also can be called aluminum embossing plate: below on the basis of aluminum plate, through a rolling process in a variety of patterns formed on the surface of aluminum products, the wide of the used this embossed aluminum plate, mainly used in the packaging, construction, walls, and so on.

Posted in Tips.